Allen Build Well Private Limited

Milling/stabilizing attachments for wheel loaders mill asphalt prior to overlay, cut utility trenches, and perform in-place recycling of chip and seal as well as stabilization of road base and soil.

Liquid stabilizers can be added through the optional injection bar mounted over the cutting drum. The RoadHog is completely self contained with its own engine and hydraulic system, which eliminates power requirements from the host vehicle. It is powered by a Caterpillar turbocharged Tier 4-compliant diesel engine, in 142-, 225-, and 275-horsepower versions. Cutting widths range from 40 to 96 inches, with a cutting depth of 0 to 12 inches using replaceable carbide cutting teeth. All units feature hydraulic control of tilt (slope) depth and sideshift via a wireless remote control.

Note: Now available on Rent

Milling/stabilizing attachments for wheel loaders mill asphalt prior to overlay, cut utility trenches, and perform in-place recycling of chip and seal as well as stabilization of road base and soil.

Liquid stabilizers can be added through the optional injection bar mounted over the cutting drum. The RoadHog is completely self contained with its own engine and hydraulic system, which eliminates power requirements from the host vehicle. It is powered by a Caterpillar turbocharged Tier 4-compliant diesel engine, in 142-, 225-, and 275-horsepower versions. Cutting widths range from 40 to 96 inches, with a cutting depth of 0 to 12 inches using replaceable carbide cutting teeth. All units feature hydraulic control of tilt (slope) depth and sideshift via a wireless remote control.

Note: Now available on Rent

Milling/stabilizing attachments for wheel loaders mill asphalt prior to overlay, cut utility trenches, and perform in-place recycling of chip and seal as well as stabilization of road base and soil.

Liquid stabilizers can be added through the optional injection bar mounted over the cutting drum. The RoadHog is completely self contained with its own engine and hydraulic system, which eliminates power requirements from the host vehicle. It is powered by a Caterpillar turbocharged Tier 4-compliant diesel engine, in 142-, 225-, and 275-horsepower versions. Cutting widths range from 40 to 96 inches, with a cutting depth of 0 to 12 inches using replaceable carbide cutting teeth. All units feature hydraulic control of tilt (slope) depth and sideshift via a wireless remote control.

Note: Now available on Rent

Milling/stabilizing attachments for wheel loaders mill asphalt prior to overlay, cut utility trenches, and perform in-place recycling of chip and seal as well as stabilization of road base and soil.

Liquid stabilizers can be added through the optional injection bar mounted over the cutting drum. The RoadHog is completely self contained with its own engine and hydraulic system, which eliminates power requirements from the host vehicle. It is powered by a Caterpillar turbocharged Tier 4-compliant diesel engine, in 142-, 225-, and 275-horsepower versions. Cutting widths range from 40 to 96 inches, with a cutting depth of 0 to 12 inches using replaceable carbide cutting teeth. All units feature hydraulic control of tilt (slope) depth and sideshift via a wireless remote control.

Note: Now available on Rent

The Roadtec mid-size SX-5e stabilizer-reclaimer features a new 513 hp (382 kW) Cummins® QSG12 engine. It joins the larger 620 hp (462 kW) model in the company’s line of stabilizers-reclaimers. The SX-5e complies with Tier 4 Final and Stage IV emission standards. Weighing in at 26,770 kg, the SX-5e is nimble yet powerful.

Soil Stabilization
Soils with insufficient strength are stabilized by uniformly mixing cement, lime slurry or emulsion to a depth. The material is then graded and compacted to serve as the base for a new road surface.

Full Depth Reclamation
The full thickness of the asphalt surface and a portion of the underlying base are uniformly graded and pulverised to serve as the base for a new surface course.

Application:
Tractive Effort 
Increased tractive effort through 4 wheel drive and perfect weight balance between the front and rear axles.

Cooling Package
The SX-5e cooling package introduces air from the cleanest area possible at the top of the machine and exhausted through the rear radiator package. This efficient design reduces the amount if the dust and debris brought into the radiator package.

Weight Balance:
The machine weight is perfectly balanced between the two axles. The ideal weight placement compliments the 4-wheel drive system and allows the machine to maintain consistent cut depths.

Accessibility & Maintenance Features
Easy access and operatorstation
Hydraulically adjustable doors allow for better access to the engine compartment.

• Ground level, slide-out racks provide easier access to the machine’s battery compartment. 
• Quick and easy belt maintenance access on left hand side of Machine. Pressurised Cab with standard climate control system (air condition). Standard Rear back-up camera. Simple Joy Stick controls and a vivid colour control screen enhance the machine’s ease of operation.

Note: Now available on Rent

Dust-Free Spreading, Grinding and wetting in one process: 
SBF-24-6 Soil Stabilization grinder and the SBS Bonding agent spreader solves one of the biggest problems in soil stabilization work: When used as bonding agents, lime and cement are very effective bit also relatively harsh & caustic. This makes it almost impossible to stabilize soil near residential areas, traffic, parked cars and airports, specially in windy weather when the spreader binding material will be blown away when spreading from Open truck mounted spreaders. 

Fuel Efficient 
The high energy efficiency, economical fuel consumption as well as low pollutant and noise emissions always play a major role in the Stehr machines. With over 50 % less fuel compared to conventional machines, payback is achieved by the fuel savings alone One single prime over to do 3 jobs simultaneously. 

Drive Concept & Energy saving 
The power from the tractor's PTO shaft to the cuffing rotor is not transmitted, as is usually the case, via power-absorbing side spur gears, but via power belts arranged on both sides, which run at high speed and therefore only have to transmit a relatively low torque. Torque build-up is only achieved via the planetary gear when the torque is needed: in the cutting rotor The lateral chain drive is very narrow compared to spur gears. This is very important because the housing of the side drive is pulled through the soil in the lower area. The narrower the side drive, the less power is required. 

Note: Now available on Rent

The high performance SX-8 is ideal for toughest soil stabilization jobs

Power & High-Performance 
The high-performance SX-8 soil stabilizer-reclaimer combines power with a large working width and depth, making it ideal for the toughest soil stabilization jobs. The SX-8 features a clean-running 755 hp (563 kW) CAT® C18 engine that provides power to the rotor through a direct drum drive. The machine is capable of cutting up to 20 (508mm) deep and 100 (2,540mm) wide. Whether performing road rehabilitation, cold recycling, or soil stabilization, the Roadtec SX-8 will meet and exceed  your expectations. 

Efficient Milling & Mixing 
The SX-8 has a powerful rotor for milling and mixing the most resistant soils completely and homogeneously. A variable geometry cutter housing enables the SX-8 to obtain a quality material gradation with each pass. The variable geometry design positions the cutter in a way that promotes material sizing as well as the flow of the material. Heavy-duty front and rear doors are hydraulically adjustable for additional control of gradation and flow. 

Designed for Operator Comfort 8c

Visibility 
The SX-8 was designed with operator comfort and visibility in mind. The ergonomic design of the sealed cabin situates the operator in optimal position to reach all important controls and systems. The machines controls are conveniently arranged to allow for safe and convenient machine operation. Joystick controls and four different steering modes increase the machines maneuverability and ease of operation. The operator seat slides laterally and swings 90° to help create the perfect vantage point from which to work. The operator platform also slides 18 past the right of the machine for additional visibility. The ergonomic design of the sealed cabin situates the operator in optimal position to reach all important controls and systems. 

Cooling System 
The SX-8 cooling system pulls air from the cleanest possible area at the top of the machine before it is exhausted through the radiator package. This reduces the amount of dust traveling though the cooling system and makes it more efficient. Clean-out panels provide convenient access for radiator maintenance. 

Weight Balance
Designed to perform in the cut without being extremely heavy to transport or consuming excessive fuel, The SX-8s weight is evenly distributed between the two axles. This allows power to be applied as efficiently as possible. With weight balanced over the cutter, the machine is better equipped to perform in the most difficult project environments. 

Air-Shift Transmission 
An air-shift 4-speed transmission allows the change of cutter speeds without a loss in production on the SX-8. The operator can select the appropriate cutter speed for the current conditions without making modifications the cutter drive, saving an enormous amount of time and effort. 

Note: Now available on Rent

The roadtec difference: Delivering quality and innovation with superior customer service

Dependability 
Roadtec has been manufacturing innovative, heavy-highway equipment since 1981. We continue to grow and add new products, yet our personal connection to our customers and our ability to respond immediately to your needs is even stronger. 

Customer Service 
Our customers benefit from our strong focus on customer support after the sale. In-the-field service technicians live in the regions where they work and respond quickly. 24/7 parts support will get you the right parts fast, and at a fair price. Our product specialists will train your people on any newly purchased machine, and we also offer industry-leading training at our state-of the art training facility or in the field.

Count on Roadtec Equipment 
We dont build roads. We make the equipment so you can cost-effectively build and maintain the worlds roads. With the Roadtec heavy-duty design, we are able to keep your machine working longer while lowering maintenance and operating costs. We are also able to make your operators more comfortable and confident with our user-friendly design and our customization for special projects. 

A rare combination of power and mobility lets you excel in a variety of applications

Versatility 
With a clean-running 675 hp (503 kW) Cummins® QSX-15 engine and a weight of 83,480 (37,865 kg), the mid-size SX-6 offers a rare combination of power and mobility allowing it to excel in different applications. The SX-6 is equipped with a high performance 6-cylinder diesel engine that provides power to the rotor through a direct drum drive. The machine is capable of cutting up to 20 (508mm) deep and 100 (2,540mm) wide. Whether performing road rehabilitation, cold recycling, or soil stabilization, the Roadtec SX-6 will meet and exceed your expectations. 

Built to work with strength and precision in the toughest environments 

Strong Frame & Hydraulic Suspension 
The SX-6 is manufactured with a durable frame built at Roadtec from extremely strong A656 grade 80 steel. This steel has twice the yield strength as the mild steel used in other machines on the market. The custom-made frame is designed to perform in all terrains by providing substantial ground clearance. The wheels are suspended by four independently controlled hydraulically adjustable leg assemblies that are bolted to the mainframe. This feature allows the depth of cut to be selected via push button. The cutter housing is also securely fastened to the mainframe, providing strength and precision while the machine is working. 

Powerful & Efficient Cooling 
The SX-6 cooling system introduces air from the top of the machine at the cleanest possible area, before it is exhausted away from the machine and engine through the rear radiator package. By pulling air from the top of the machine, the amount of dust traveling through the cooling system is limited. Clean-out panels provide convenient access for radiator maintenance. A variable speed fan also provides efficient cooling based on engine demand. 

Excellent visibility, ergonomic controls and operator comfort increase your productivity
Visibility & Operator Platform 
Designed for visibility and ease of operation, the operators stations seat slides laterally and swings 90° to help create the perfect vantage point from which to work. The operator platform also slides 18 past the right of the machine for additional visibility. A full view cab gives the operator an excellent view of the cutting edge and any obstacles that may be in the way.

Note: Now available on Rent